User guide

Configuration
Configure Using the Network Setup Wizard
36
14143L-005 Rev. A Wireless User Guide 4/29/08
14. Click Next.
Based on your selections in the Wireless Setup Wizard, the program writes the appropriate
ZPL commands and displays them for your review. An example of the code is shown in
Figure 4.
Figure 4 • ZPL Code Generated by the Wireless Setup Wizard
15. Continue with the desired action:
To... Then...
Complete setup by sending
the ZPL script to the printer
through the port selected at
the beginning of this
procedure
a. Verify that the printer is connected to the computer
through the port you selected.
Note • For serial connections, use a serial null
modem cable.
b. If you have not already done so, turn on (I) the printer.
c. On the Review and Send ZPL for Wireless window,
click
Finish.
The printer sends the ZPL script to the printer through
the selected port. The Wireless Setup Wizard screen
closes.
d. Turn the printer off (O) and then back on (I).