User guide

215
SGD Commands for Wireless Operation
wlan.wpa.psk
4/29/08 Wireless User Guide 14143L-005 Rev. A
wlan.wpa.psk
Description This printer setting specifies the pre-shared key (PSK) value to use when the
WPA authentication is set to PSK. This value is calculated and must be the same for each
device on the WLAN. Use ZebraNet Bridge to generate the PSK value.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the pre-shared key.
Format: ! U1 getvar "wlan.wpa.psk"
For protection a single "*" prints.
setvar
This command instructs the printer to set the pre-shared key.
Format: ! U1 setvar "wlan.wpa.psk" "value"
Va lues : 64 hexadecimal digits
Default: 64 zeros (00000000...)
Example • This setvar example shows the value set to "00000000...".
! U1 setvar "wlan.wpa.psk" "00000000..."
When the setvar value is set to "00000000...", the getvar result is "*".