User guide

SGD Commands for Wireless Operation
wlan.wep.key3
212
14143L-005 Rev. A Wireless User Guide 4/29/08
wlan.wep.key3
Description This printer setting refers to the third indexed WEP encryption key. The WEP
encryption key is a hexadecimal string value. This key should match the wireless network
WEP encryption key 3.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the encryption key.
Format: ! U1 getvar "wlan.wep.key3"
Format: For protection a single "*" prints.
setvar
This command instructs the printer to set the encryption key.
Format: ! U1 setvar "wlan.wep.key3" "value"
Va lues :
10 hexadecimal characters for 40-bit encryption
26 hexadecimal characters for 128-bit encryption
Default: All zeros
Example • This setvar example shows the value set to "A1B2C3D4F5".
! U1 setvar "wlan.wep.key3" "A1B2C3D4F5"
When the setvar value is set to "A1B2C3D4F5", the getvar result is "*".