User guide

SGD Commands for Wireless Operation
wlan.wep.auth_type
208
14143L-005 Rev. A Wireless User Guide 4/29/08
wlan.wep.auth_type
Description For the WEP security type, this printer setting selects the authentication type to
be used between the printer and the access point. The authentication types are open system and
shared key.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to retrieve the current WEP
authentication type.
Format: ! U1 getvar "wlan.wep.auth_type"
setvar
This command instructs the printer to set the WEP authentication type.
Format: ! U1 setvar "wlan.wep.auth_type" "value"
Va lues :
"open" = enables the open authentication type
"shared" = enables the shared authentication type
Default: "open"
Example • This setvar example shows the value set to "open".
! U1 setvar "wlan.wep.auth_type" "open"
When the setvar value is set to "open", the getvar result is "open".