User guide

SGD Commands for Wireless Operation
wlan.tx_rate
206
14143L-005 Rev. A Wireless User Guide 4/29/08
wlan.tx_rate
Description This printer setting refers to specifying the wireless transmit rate.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the wireless transmit
rate.
Format: ! U1 getvar "wlan.tx_rate"
setvar
This command instructs the printer to set the wireless transmit rate.
Format: ! U1 setvar "wlan.tx_rate" "value"
Va lues : 1, 2, 5.5, 11, all
Default: "all"
Example • This setvar example shows the value set to "all".
! U1 setvar "wlan.tx_rate" "all"
When the setvar value is set to "all", the getvar result is "all".