User guide

203
SGD Commands for Wireless Operation
wlan.signal_strength
4/29/08 Wireless User Guide 14143L-005 Rev. A
wlan.signal_strength
Description This command returns the signal strength of the connection to the access point
as a percentage value between zero (not connected) and 100 (strongest signal). Values below
40% represent a very poor signal and radio communication is not reliable.
Type getvar
This table identifies the command for this format:
Commands Details
getvar
This command instructs the printer to respond with the current signal
strength.
Format: ! U1 getvar "wlan.signal_strength"
Example • In this example, the getvar result is "93".
! U1 getvar "wlan.signal_strength"