User guide

SGD Commands for Wireless Operation
wlan.signal_quality
202
14143L-005 Rev. A Wireless User Guide 4/29/08
wlan.signal_quality
Description This command instructs the printer to return the current signal quality of the
wireless network. Values below 40% represent a very poor signal quality, and radio
communication is not reliable.
Type getvar
This table identifies the command for this format:
Commands Details
getvar
This command instructs the printer to return the current signal quality of
the wireless network.
Format: ! U1 getvar "wlan.signal_quality"
Example • In this example, the getvar result is the current signal_quality value.
! U1 getvar "wlan.signal_quality"