User guide

201
SGD Commands for Wireless Operation
wlan.signal_noise
4/29/08 Wireless User Guide 14143L-005 Rev. A
wlan.signal_noise
Description This command returns the signal noise on the wireless network. Values above
40% represent a very significant noise, and radio communication is not reliable.
Type getvar
This table identifies the command for this format:
Commands Details
getvar
This command instructs the printer to return the current signal noise on the
wireless network.
Format: ! U1 getvar "wlan.signal_noise"
Example • In this example, the getvar result is the current signal_noise value.
! U1 getvar "wlan.signal_noise"