User guide

SGD Commands for Wireless Operation
wlan.security
198
14143L-005 Rev. A Wireless User Guide 4/29/08
Security Type 10: WPA EAP-TLS
Additional parameters that need to be set and the SGD commands to use:
• optional private key password (see wlan.private_key_password on page 189)
Security Type 11: WPA EAP-TTLS
Additional parameters that need to be set and the SGD commands to use:
• user ID (see wlan.username on page 207)
• password (see wlan.password on page 187)
Note • Configuring the printer for WPA also allows the printer to be used in WPA2
environments.
Example • This example configures the printer for WPA EAP-TLS authentication with an
optional private key password with a value of “private.”
! U1 setvar "wlan.security" "10"
! U1 setvar "wlan.private_key_password" "private"
Note • Configuring the printer for WPA also allows the printer to be used in WPA2
environments.
Example • This example configures the printer for WPA EAP-TTLS authentication,
including a user ID with a value of “user” and a password with a value of “password.”
! U1 setvar "wlan.security" "11"
! U1 setvar "wlan.username" "user"
! U1 setvar "wlan.password" "password"