User guide

SGD Commands for Wireless Operation
wlan.security
192
14143L-005 Rev. A Wireless User Guide 4/29/08
wlan.security
Description This printer setting allows you to specify both the wireless encryption type and
authentication type in one command.
Type getvar; setvar
These certificate files can only be sent using ZPL, not SGD. The ZPL command to use when
sending these certificate files is the ~DY command.
Note • The supporting parameters that are required vary based on the security type that you
select. See Supporting SGD Commands for Different Security Types on page 194 for
instructions for each security type.
Note • When using certificate files, Zebra printers support:
• using Privacy Enhanced Mail (PEM) formatted certificate files.
• using the client certificate and private key as two files, each downloaded separately.
• using exportable PAC files for EAP-FAST.
Note • Configuring the printer for WPA also allows the printer to be used in WPA2
environments.