User guide

SGD Commands for Wireless Operation
wlan.preamble
188
14143L-005 Rev. A Wireless User Guide 4/29/08
wlan.preamble
Description This printer setting selects the radio preamble length to be used.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the current preamble
length.
Format: ! U1 getvar "wlan.preamble"
setvar
This command instructs the printer to set the preamble length.
Format: ! U1 setvar "wlan.preamble" "value"
Va lues :
"long" = enables long preamble
"short" = enables short preamble
Default: "long"
Example • This setvar example shows the value set to "long".
! U1 setvar "wlan.preamble" "long"
When the setvar value is set to "long", the getvar result is "long".