User guide

SGD Commands for Wireless Operation
wlan.keep_alive.timeout
180
14143L-005 Rev. A Wireless User Guide 4/29/08
wlan.keep_alive.timeout
Description This printer setting manages the interval at which the LSAP (link service
access point) packet is sent.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the
wlan.keep_alive.timeout interval value.
Format: ! U1 getvar "wlan.keep_alive.timeout"
setvar
This command instructs the printer to configure the frequency at which the
printer sends the wlan.keep_alive packet.
Format: ! U1 setvar "wlan.keep_alive.timeout" "value"
Va lues : 5 to 300 seconds
Default: "15"
Example • This setvar example shows the value set to "15".
! U1 setvar "wlan.keep_alive.timeout" "15"
When the setvar value is set to "15", the getvar result is "15".