User guide

Introduction
Printer Requirements and Print Server Features
18
14143L-005 Rev. A Wireless User Guide 4/29/08
S4M V50.15.x or later ZPL Wireless Print Server and Wireless Plus
Print Server: The printer must have the
correct wireless option board installed to use
the V50.15.x or later firmware. Printers that
have a different wireless option board cannot
use this firmware. To determine if the correct
wireless option board is installed, view the
HARDWARE ID line on a printer configuration
label. The value reads V23 29882-001_3
when the correct board is installed. Refer to
the S4M User Guide for instructions for
printing a printer configuration label.
Internal Wireless Plus Print Server:
Requires firmware versions X.16 or later.
V53.15.8Z or later ZPL and
XML-enabled printing
E53.15.0 or later EPL
D53.15.0 or later APL-D
I53.15.0 or later APL-I
XiIIIPlus V60.15.8Z or later ZPL and
XML-enabled printing
Internal Wireless Plus Print Server:
Requires firmware versions X.16 or later.
D60.15.0 or later APL-D
I60.15.0 or later APL-I
Z4Mplus,
Z6Mplus
V60.15.8Z or later ZPL and
XML-enabled printing
Wireless Print Server: A printer with an
existing Wireless Print Server can be upgraded
to X60.15.x. Does not support CardBus
wireless cards and IEEE 802.11g.
Wireless Plus Print Server: Not available.
Internal Wireless Plus Print Server: Not
available.
D60.15.0 or later APL-D
I60.15.0 or later APL-I
ZM400,
ZM600
V53.15.5Z or later ZPL Internal Wireless Plus Print Server:
Requires firmware versions X.16 or later.
V53.15.8Z or later ZPL and
XML-enabled printing
E53.15.0 or later EPL
D53.15.0 or later APL-D
I53.15.0 or later APL-I
Table 1 • Supported Printer Models and Restrictions (Continued)
Printer Firmware Version Support for Notes and Restrictions