User guide

179
SGD Commands for Wireless Operation
wlan.keep_alive.enable
4/29/08 Wireless User Guide 14143L-005 Rev. A
wlan.keep_alive.enable
Description This setting controls the printers ability to send a LSAP (link service access
point) packet to the access point on an user controllable interval. This feature is included to
accommodate access points that require a regular confirmation that wireless clients are still
active.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the
wlan.keep_alive.enable setting.
Format: ! U1 getvar "wlan.keep_alive.enable"
setvar
This command instructs the printer to send a LSAP (link service access
point) packet to the access point on an user controllable interval.
Format: ! U1 setvar "wlan.keep_alive.enable" "value"
Va lues :
"on" = turns on keep_alive
"off" = turns off keep_alive
Default: "on"
Example • This setvar example shows the value set to "on".
! U1 setvar "wlan.keep_alive.enable" "on"
When the setvar value is set to "on", the getvar result is "on".