User guide

SGD Commands for Wireless Operation
wlan.ip.timeout.value
178
14143L-005 Rev. A Wireless User Guide 4/29/08
wlan.ip.timeout.value
Description This network setting refers to the number of seconds before the connection
times out for the wireless print server. For this to take effect, the print server must be reset.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the time, in seconds,
before the connection times out.
Format: ! U1 getvar "wlan.ip.timeout.value"
setvar
This command instructs the printer to set the the time value of the wireless
print server, in seconds, before the connection times out.
Format: ! U1 setvar "wlan.ip.timeout.value" "value"
Va lues : "1" through "3600"
Default: "300"
Example • This setvar example shows the value set to "300".
! U1 setvar "wlan.ip.timeout.value" "300"
When the setvar value is set to "300", the getvar result is "300".