User guide

175
SGD Commands for Wireless Operation
wlan.ip.port
4/29/08 Wireless User Guide 14143L-005 Rev. A
wlan.ip.port
Description This printer setting refers to the wireless print server’s port number that the
TCP print service is listening on. Normal TCP communications from the host should be
directed to this port.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the wireless printer
server’s TCP/UDP port number.
Format: ! U1 getvar "wlan.ip.port"
setvar
This command instructs the printer to set the wireless print server’s
TCP/UDP port number.
Format: ! U1 setvar "wlan.ip.port" "value"
Va lues : 1 - 65535 (excluding any ports currently used by other services,
such as 21, 23, 80, and 515).
Default: "9100"
Example • This setvar example shows the value set to "9100".
! U1 setvar "wlan.ip.port" "9100"
When the setvar value is set to "9100", the getvar result is "9100".