User guide

SGD Commands for Wireless Operation
wlan.ip.netmask
174
14143L-005 Rev. A Wireless User Guide 4/29/08
wlan.ip.netmask
Description This setting refers to the wireless print server’s subnet mask address. This value
is ignored if the IP protocol is not set to permanent.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with wireless print server’s
subnet mask.
Format: ! U1 getvar "wlan.ip.netmask"
setvar
This command instructs the printer to change the wireless print servers’s
subnet mask.
Format: ! U1 setvar "wlan.ip.netmask" "value"
Va lues : Any valid subnet mask.
Default: "255.255.255.0"
Example • This setvar example shows the value set to "255.255.255.0".
! U1 setvar "wlan.ip.netmask" "255.255.255.0"
When the setvar value is set to "255.255.255.0", the getvar result is
"255.255.255.0".