User guide

169
SGD Commands for Wireless Operation
wlan.ip.dhcp.cid_enable
4/29/08 Wireless User Guide 14143L-005 Rev. A
wlan.ip.dhcp.cid_enable
Description This command determines if DHCP (option 61) is turned on or off of the
wireless print server.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the status of the client
identifier of the wireless print server.
Format:
! U1 getvar "wlan.ip.dhcp.cid_enable"
setvar
This command instructs the printer to set the status of the client identifier
of the wireless print server.
Format:
! U1 setvar "wlan.ip.dhcp.cid_enable" "value"
Va lues :
"off" = client identifier is turned off
"on" = client identifier is turned on
Default: "off"
Example • This setvar example shows the value set to "off".
! U1 setvar "wlan.ip.dhcp.cid_enable" "off"
What the setvar value is set to is the getvar result. In this example, the getvar result is
"off".