User guide

167
SGD Commands for Wireless Operation
wlan.ip.arp_interval
4/29/08 Wireless User Guide 14143L-005 Rev. A
wlan.ip.arp_interval
Description This print server setting allows you to specify the ARP (Address Resolution
Protocol) interval or the ARP cache time out for the wireless print server.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the ARP interval or the
ARP cache time out value (in seconds) for the wireless print server.
Format: ! U1 getvar "wlan.ip.arp_interval"
setvar
This command instructs the printer to respond with the ARP interval or the
ARP cache time out value for the wireless print server.
Format: ! U1 setvar "wlan.ip.arp_interval" "value"
Va lues : 0 to 30 seconds
Default: "0"
Example • This setvar example shows the value set to "0".
! U1 setvar "wlan.ip.arp_interval" "0"
What the setvar value is set to is the getvar result. In this example, the getvar result is
"0".