User guide

SGD Commands for Wireless Operation
wlan.essid
164
14143L-005 Rev. A Wireless User Guide 4/29/08
wlan.essid
Description This printer setting refers to the printer’s stored ESSID. Setting the ESSID to ""
will set the printer in a "broadcast" mode.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the stored ESSID
value.
Format: ! U1 getvar "wlan.essid"
setvar
This command instructs the printer to change the ESSID.
Format: ! U1 setvar "wlan.essid" "value"
Va lues : 32 character alphanumeric string
Default: "125"
Example • This setvar example shows the value set to "125".
! U1 setvar "wlan.essid" "125"
When the setvar value is set to "125", the getvar result is "125".