User guide

161
SGD Commands for Wireless Operation
wlan.adhocchannel
4/29/08 Wireless User Guide 14143L-005 Rev. A
wlan.adhocchannel
Description This printer setting refers to specifying the wireless channel for adhoc channel.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the wireless channel
for adhoc channel mode.
Format: ! U1 getvar "wlan.adhocchannel"
setvar
This command instructs the printer to set the wireless channel for adhoc
channel mode.
Format: ! U1 setvar "wlan.adhocchannel" "value"
Va lues : Decimal value between 1 and 16 inclusive
Default: "1"
Example • This setvar example shows the value set to "1".
! U1 setvar "wlan.adhocchannel" "1"
When the setvar value is set to "1", the getvar result is "1".