User guide

SGD Commands for Wireless Operation
wlan.adhocautomode
160
14143L-005 Rev. A Wireless User Guide 4/29/08
wlan.adhocautomode
Description This printer setting refers to enabling or disabling the adhoc auto mode.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the adhoc auto mode
status.
Format: ! U1 getvar "wlan.adhocautomode"
setvar
This command instructs the printer to set the adhoc auto mode.
Format: ! U1 setvar "wlan.adhocautomode" "value"
Va lues :
"on" = adhoc auto mode enabled
"off" = adhoc auto mode disabled
Default: "off"
Example • This setvar example shows the value set to "on".
! U1 setvar "wlan.adhocautomode" "on"
When the setvar value is set to "on", the getvar result is "on".