User guide

SGD Commands for Wireless Operation
ip.snmp.set_community_name
156
14143L-005 Rev. A Wireless User Guide 4/29/08
ip.snmp.set_community_name
Description This printer setting is used when changing SNMP data remotely. To alter any
SNMP data, the SNMP client must supply the set community name that matches the printer’s
set community name.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to return the printer’s SNMP set
community name string.
Format: ! U1 getvar "ip.snmp.set_community_name"
For protection a single "*" returns.
setvar
This command instructs the printer to set the SNMP set community name
string.
Format: ! U1 setvar "ip.snmp.set_community_name"
"value"
Va lues : A maximum of 19 alphanumeric characters
Default: "public"
Example • This setvar example shows the value set to "public".
! U1 setvar "ip.snmp.set_community_name" "public"
When the setvar value is set to "public", the getvar result is "*".