User guide

155
SGD Commands for Wireless Operation
ip.snmp.get_community_name
4/29/08 Wireless User Guide 14143L-005 Rev. A
ip.snmp.get_community_name
Description This printer setting is used when making SNMP queries. The SNMP client
must supply the get community name that matches the printer’s get community name in order
to query any SNMP data.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to get the SNMP get community name
string.
Format: ! U1 getvar "ip.snmp.get_community_name"
For protection a single "*" prints.
setvar
This command instructs the printer to set the SNMP get community name
string.
Format:
! U1 setvar "ip.snmp.get_community_name" "value"
Va lues : A maximum of 19 alphanumeric characters.
Default: "public"
Example • This setvar example shows the value set to "public".
! U1 setvar "ip.snmp.get_community_name" "public"
When the setvar value is set to "public", the getvar result is "*".