User guide

SGD Commands for Wireless Operation
ip.smtp.enable
152
14143L-005 Rev. A Wireless User Guide 4/29/08
ip.smtp.enable
Description This printer setting refers to the SMTP protocol.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to return the SMTP status.
Format: ! U1 getvar "ip.smtp.enable"
setvar
This command instructs the printer to turn SMTP on or off.
Format: ! U1 setvar "ip.smtp.enable" "value"
Va lues :
"off" = disables SMTP
"on" = enables SMTP
Default: "on"
Example • This setvar example shows the value set to "on".
! U1 setvar "ip.smtp.enable" "on"
When the setvar value is set to "on", the getvar result is "on".