User guide

149
SGD Commands for Wireless Operation
ip.pop3.username
4/29/08 Wireless User Guide 14143L-005 Rev. A
ip.pop3.username
Description This printer setting refers to the POP3 user name. This only applies if the
"ip.pop3.enable" is set to on.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the POP3 user name.
Format: ! U1 getvar "ip.pop3.username"
setvar
This command instructs the printer to change the POP3 user name.
Format: ! U1 setvar "ip.pop3.username" "value"
Va lues : A maximum of 20 alphanumeric characters
Default: " "
Example • This setvar example shows the value set to "user".
! U1 setvar "ip.pop3.username" "user"
When the setvar value is set to "user", the getvar result is "user".