User guide

SGD Commands for Wireless Operation
ip.pop3.server_addr
148
14143L-005 Rev. A Wireless User Guide 4/29/08
ip.pop3.server_addr
Description This printer setting refers to the POP3 server IP address that the printer contacts
when checking for new mail. This only applies if "ip.pop3.enable" is set to on.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the POP3 server
address.
Format: ! U1 getvar "ip.pop3.server_addr"
setvar
This command instructs the printer to change the POP3 server address.
Format: ! U1 setvar "ip.pop3.server_addr" "value"
Va lues : Any valid POP3 server address
Default: "0.0.0.0"
Example • This setvar example shows the value set to "10.3.5.10".
! U1 setvar "ip.pop3.server_addr" "10.3.5.10"
When the setvar value is set to "10.3.5.10", the getvar result is "10.3.5.10".