User guide

SGD Commands for Wireless Operation
ip.pop3.password
146
14143L-005 Rev. A Wireless User Guide 4/29/08
ip.pop3.password
Description This printer setting refers to the POP3 mailbox password. This only applies if
"ip.pop3.enable" is set to on.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the POP3 password.
Format: ! U1 getvar "ip.pop3.password"
For protection a single "*" prints.
setvar
This command instructs the printer to change the POP3 password.
Format: ! U1 setvar "ip.pop3.password" "value"
Va lues : A maximum of 20 alphanumeric characters
Default: " "
Example • This setvar example shows the value set to "password".
! U1 setvar "ip.pop3.password" "password"
When the setvar value is set to "password", the getvar result is "*".