User guide

SGD Commands for Wireless Operation
ip.http.enable
142
14143L-005 Rev. A Wireless User Guide 4/29/08
ip.http.enable
Description This printer setting refers to the HTTP protocol/web server setting.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the HTTP status.
Format: ! U1 getvar "ip.http.enable"
setvar
This command instructs the printer to change HTTP to on or off.
Format: ! U1 setvar "ip.http.enable" "value"
Va lues :
"off" = disables HTTP protocol
"on" = enables HTTP protocol
Default: "on"
Example • This setvar example shows the value set to "on".
! U1 setvar "ip.http.enable" "on"
When the setvar value is set to "on", the getvar result is "on".