User guide

SGD Commands for Wireless Operation
ip.arp_interval
132
14143L-005 Rev. A Wireless User Guide 4/29/08
ip.arp_interval
Description This printer setting allows you to specify the ARP (Address Resolution
Protocol) interval or the ARP cache time out.
Type getvar; setvar
This table identifies the commands for this format:
Commands Details
getvar
This command instructs the printer to respond with the ARP interval or the
ARP cache time out value in seconds.
Format: ! U1 getvar "ip.arp_interval"
setvar
This command instructs the printer to change the ARP interval or the ARP
cache time out.
Format: ! U1 setvar "ip.arp_interval" "value"
Va lues : 0 - 30
Default: "0"
Example • This setvar example shows the value set to "0".
! U1 setvar "ip.arp_interval" "0"
What the setvar value is set to is the getvar result. In this example, the getvar result is
"0".