User guide

131
SGD Commands for Wireless Operation
ip.addr
4/29/08 Wireless User Guide 14143L-005 Rev. A
ip.addr
Description This command allows you to get or set the printer’s IP address.
Type getvar; setvar
This table identifies the commands for this format:
Important • For a set IP address to take affect, the IP protocol must be set to permanent and
the print server must be reset.
Commands Details
getvar
This command instructs the printer to respond with its current IP address.
Format: ! U1 getvar "ip.addr"
setvar
This command instructs the printer to change its current IP address upon
powering the printer on.
Format: ! U1 setvar "ip.addr" "value"
Va lues : any valid IP address
Default: "0.0.0.0"
Note • The setvar value of this command can be affected by the ip.dhcp.enable
command.
Example • This setvar example shows the value set to "10.14.4.235".
! U1 setvar "ip.addr" "10.14.4.235"
What the setvar value is set to is the getvar result. In this example, the getvar result is
"10.14.4.235".