User guide

115
ZPL Commands for Wireless Operation
^WX
4/29/08 Wireless User Guide 14143L-005 Rev. A
^WX
Configure Wireless Securities
Description Use this command to configure the wireless security settings for your printer.
Values entered for this command must match what is configured on your WLAN and must be
supported by the wireless radio card that you are using.
The ^WX command replaces individual ZPL commands for different security types. Different
security types are described in the Glossary on page 217.
Format ^WXa,[zero or more supporting parameters]
This command applies to printers with firmware version X60.15.x, V53.15.x, V50.15.x, or
later.
Note • When using certificate files, your printer supports:
• Using Privacy Enhanced Mail (PEM) formatted certificate files.
• Using the client certificate and private key as two files, each downloaded separately.
• Using exportable PAC files for EAP-FAST.
Note • The supporting parameters that are required vary based on the security type that you
select. See Supporting Parameters for Different Security Types on page 119 for instructions
for each security type.