User guide

111
ZPL Commands for Wireless Operation
^WR
4/29/08 Wireless User Guide 14143L-005 Rev. A
^WR
Set Transmit Rate
Description Use this command to change the transmission parameters.
Format ^WRa,b,c,d,e
The following table identifies the parameters for this format.
Parameters Details
a =rate 1
Sets the 1 Mb/s transmit rate.
Accepted Values: Y (On), N (Off)
b =rate 2
Sets the 2 Mb/s transmit rate.
Accepted Values: Y (On), N (Off)
c =rate 5.5
Sets the 5.5 Mb/s transmit rate.
Accepted Values: Y (On), N (Off)
d =rate 11
Sets the 11 Mb/s transmit rate.
Accepted Values: Y (On), N (Off)
e =transmit power Accepted Values: 1, 5, 20, 30, 50, 100