User guide

ZPL Commands for Wireless Operation
^NW
102
14143L-005 Rev. A Wireless User Guide 4/29/08
^NW
Set Web Authentication Timeout Value
Description Use this command to set the timeout value for the printer home page. The
printer will prompt for the printer password only the first time that certain screens are accessed
until 1) the web authentication timeout value is reached (default value is 5 minutes) or
2) the printer is reset. At that time, the printer will prompt for the password again.
Format ^NWa
The following table identifies the parameters for this format.
Parameters Details
a = timeout value
The timeout value in minutes for an IP address to be
authenticated to the printer web pages.
Accepted Values: 0 (no secure pages can be accessed without
entering the printer password) to 255 minutes
Default Value: 5