User guide

49
ZPL Commands for the Wireless Print Server
^WS
9/29/05 Wireless Print Server User Guide 13422L-002 Rev. B
^WS
Set Wireless Card Values
Description This command sets the wireless card values for ESSID, Operating Mode, and
Card Preamble.
Format ^WSe,o,p
The following table identifies the parameters for this format.
Parameters Details
e = ESSID value
Accepted Values: Any value up to 32 characters, including all ASCII and
Extended ASCII characters, including the space character. When this
parameter is left blank, the ESSID is not changed.
Default Value: 125
o = operating mode
Accepted Values: I (Infrastructure), A (Adhoc)
Default Value: I
p = wireless card preamble
Accepted Values: L (Long), S (Short)
Default Value: L