User guide

47
ZPL Commands for the Wireless Print Server
^WR
9/29/05 Wireless Print Server User Guide 13422L-002 Rev. B
^WR
Set Transmit Rate
Description Use this command to change the transmission parameters.
Format ^WRa,b,c,d,e
The following table identifies the parameters for this format.
Parameters Details
a = rate 1
Sets the 1 Mb/s transmit rate.
Accepted Values: Y (On), N (Off)
b = rate 2
Sets the 2 Mb/s transmit rate.
Accepted Values: Y (On), N (Off)
c = rate 5.5
Sets the 5.5 Mb/s transmit rate.
Accepted Values: Y (On), N (Off)
d = rate 11
Sets the 11 Mb/s transmit rate.
Accepted Values: Y (On), N (Off)
e = transmit power
Accepted Values: 1, 5, 20, 30, 50, 100