User guide

ZPL Commands for the Wireless Print Server
^WL
44
13422L-002 Rev. B Wireless Print Server User Guide 9/29/05
^WL
Set LEAP Parameters
Description Use this command to set LEAP mode, user name, and password.
Format ^WLa,b,c
The following table identifies the parameters for this format.
Note • LEAP is only available with some wireless cards.
Parameters Details
a = Mode Accepted Values: OFF, ON
b = User Name Accepted Values: Any 4 to 40 alphanumeric characters
c = Password Accepted Values: Any 4 to 40 alphanumeric characters