User guide

ZPL Commands for the Wireless Print Server
^WE
42
13422L-002 Rev. B Wireless Print Server User Guide 9/29/05
Example 2 •This example sets encryption to 128-bit, activates encryption key 2, and sets
encryption keys 1 and 2 to hex values.
^WE128,2,,H,12345678901234567890123456,98765432109876543
210987654
The value for encryption key 1 is stored and can be activated in the future by the following
command:
^WE128,1
Example 3 •This example sets encryption to 128-bit, activates encryption key 4, and sets
encryption key 4 to a hex value.
^WE128,4,,H,,,,98765432109876543210987654
Values are not required for encryption keys 1 through 3 when setting encryption key 4. In this
example, commas are used as placeholders for the fields for encryption keys 1 through 3.
Any previously stored values for these encryption keys do not change.
Important • Make sure that you include the exact number of commas required to get
to the slot for encryption key 4 (parameter
h).