User guide

ZPL Commands for the Wireless Print Server
^NT
38
13422L-002 Rev. B Wireless Print Server User Guide 9/29/05
^NT
Set SMTP
Description Use this command to set the Simple Mail Transfer Protocol (SMTP)
parameters. This allows you to set the e-mail settings for alerts.
Format
^NTa,b
The following table identifies the parameters for this format.
Parameters Details
a = SMTP Server Address Accepted Values: Any properly formatted server address in the
xxx.xxx.xxx.xxx format
b = Print Server Domain Accepted Values: Any properly formatted print server domain in the
xxx.xxx.xxx.xxx format