User guide

35
ZPL Commands for the Wireless Print Server
^NN
9/29/05 Wireless Print Server User Guide 13422L-002 Rev. B
^NN
Set SNMP
Description Use this command to set the Simple Network Management Protocol (SNMP)
parameters.
Format
^NNa,b,c,d,e,f
The following table identifies the parameters for this format.
Parameters Details
a = System Name
Same as printer name.
Accepted Values: Up to 17 alphanumeric characters
b = System Contact
Any contact information as desired (such as a name or phrase)
Accepted Values: Up to 50 alphanumeric characters
c = System Location
The printer’s model information.
Accepted Values: Up to 50 alphanumeric characters
d = Get Community Name Accepted Values: Up to 20 alphanumeric characters
Default Value: public
e = Set Community Name Accepted Values: Up to 20 alphanumeric characters
Default Value: public
f = Trap Community
Name
Accepted Values: Up to 20 alphanumeric characters
Default Value: public