User guide

ZPL Commands for the Wireless Print Server
^NB
34
13422L-002 Rev. B Wireless Print Server User Guide 9/29/05
^NB
Search for Wired Print Server during Network Boot
Description This command tells the printer whether to search for a wired print server at
bootup. Table 5 shows the results of this check.
Format
^NBa
The following table identifies the parameters for this format.
Note • On the S4M, only one print server can be installed at a time, so this check does not
occur.
Table 5 • Results of Check for Wired Print Server
Wired Print
Server
Connected?
Check for Wired
Print Server?
Results
Yes Skip The printer skips the check for a wired print
server. The wired print server is not
acknowledged, and the Wireless Print Server is
used as the primary print server.
Yes Check The printer checks for a wired print server. If the
wired print server is detected, it is used as the
primary print server. If it is not detected, the
Wireless Print Server is used as the primary print
server.
No Skip The printer uses the Wireless Print Server as the
primary print server without taking the time to
check for a wired print server.
No Check During bootup, the printer tries for 70 seconds to
detect a wired print server. After finding that one
is not connected, the printer uses the Wireless
Print Server as the primary print server.
Parameters Details
a = Check for Wired Print
Server at Boot Time
Accepted Values: C (CHECK), S (SKIP CHECK)
Default Value: S