User guide

Wireless Status and Settings
Printer Web Pages
30
13422L-002 Rev. B Wireless Print Server User Guide 9/29/05
13. If desired, change the following settings:
a. Enter the ESSID.
b. Select the Operating Mode and Preamble from the drop-down lists.
c. Change the Poor Signal setting.
14. Click Submit Changes.
The printer displays the following:
Wireless Setup
Changes were successfully saved (temporarily).
NOTE: Save permanent and reset network for changes to take effect.
15. Click View and Modify Printer Settings.
The View and Modify Printer Settings page for your printer returns (see Figure 12
on page 27).
16. Does your network use WEP encryption?
If... Then...
No Continue with step 17.
Yes
a. Click Network Configuration.
The Network Configuration page for your printer displays.
b. Click Wireless Encryption Setup.
The Wireless Encryption Setup page for your printer displays (see
Figure 15 on page 31).
c. Enter the encryption settings for your network. If using hex storage,
do not precede the encryption keys with 0x.
d. Click Submit Changes.
The printer displays the following:
Wireless Encryption Setup
Changes were successfully saved (temporarily).
NOTE: Save permanent and reset network for changes to take
effect.
e. Click View and Modify Printer Settings.
The View and Modify Printer Settings page for your printer returns
(see Figure 12 on page 27).