User guide

Wireless Status and Settings

Print a Network Configuration Label

13422L-002 Rev. B Wireless Print Server User Guide 9/29/05

Print a Network Configuration Label

A network configuration label lists the settings for the print servers installed in your printer.

The active print server is indicated by an asterisk. If a wired print server is not installed, the IP

information on the wired portion appears as all zeroes (000.000.000.000). If the Wireless

Print Server is not installed, the wireless portion of the label does not print.

To print a network configuration label, complete these steps:

1. From the control panel, enter Setup mode.

2. Scroll through the parameters until you reach LIST NETWORK (level 3 parameter

PRINT OUT NETWORK on the S4M).

3. Confirm printing.

A network configuration label prints (Figure 11).

Figure 11 • Network Configuration Label

Note • Refer to the user guide for your printer for specific instructions on how to use the

control panel.

asterisk

indicating

the active

print server