User guide

Configuration
Configure Using the SetWLAN Utility
14
13422L-002 Rev. B Wireless Print Server User Guide 9/29/05
10. To complete the configuration procedure, select one of the following:
11. After the ZPL script has been sent to and received by the printer, turn Off (O) the printer.
To... Then...
Send the ZPL
script through the
serial port
a. Connect your printer’s serial port to the computer using a
null modem serial cable.
b. Turn On (I) the printer.
c. On the Review and Apply Changes Window, click Finish.
The printer sends the ZPL script to the printer through the
serial port (Figure 9).
Figure 9 • Configuration Complete Message
d. Click OK.
Save the ZPL code
to a file
a. On the Review and Apply Changes Window, click Save
ZPL Script to a file.
The computer prompts you for a name and destination for
the file.
b. Enter the file name and destination.
c. Click Save.
d. Turn On (I) the printer.
e. Send the ZPL file to the printer through the connection of
your choice.