User guide

13
Configuration
Configure Using the SetWLAN Utility
9/29/05 Wireless Print Server User Guide 13422L-002 Rev. B
9. Have any of the serial port settings been modified on your printer?
If... Then...
No Continue with step 10.
Ye s You must match those serial port settings in the configuration program for
the computer and the printer to be able to communicate. To do this,
complete these steps:
a. Click Change Serial Port Settings.
The Serial Port Settings window displays (see Figure 8).
Figure 8 • Serial Port Settings Window
b. To review the settings on your printer, enter Setup mode through the
printer’s control panel, then scroll until you reach
BAUD, DATA BITS,
and
PARITY.
c. If any of the values are different, change the settings on the Serial Port
Settings window to match the settings stored in the printer.
d. Click OK.
The program returns to the Review and Apply Changes Window
(see Figure 7 on page 12).