User guide

11
Configuration
Configure Using the SetWLAN Utility
9/29/05 Wireless Print Server User Guide 13422L-002 Rev. B
Figure 5 • Wireless Settings Window
4. Enter the ESSID for your network.
5. If necessary, select a different Authentication Type.
6. If you will be using WEP encryption, enter the encryption mode, the storage method for
the encryption keys, and the current encryption key.
7. To modify other wireless parameters, complete these steps:
a. On the Wireless Settings Window, click Advanced Options.
The Advanced Wireless window displays (Figure 6).
Note •
• The settings for step 4 through step 6 must match what is set on your access point.
• If you are using hex WEP keys, do not add a leading 0x to the encryption keys.
• If you are using multiple WEP encryption keys, enter encryption keys 2, 3, and 4 and
specify the current key by using the printer’s web pages. For instructions on accessing
and using the web pages, see Printer Web Pages on page 26.