User guide

About This Document
Who Should Use This Document
6
14143L-008 Rev. B Wireless User Guide 2/16/11
Who Should Use This Document
This User Guide is intended for use by someone who needs to configure and use a wireless
print server for use with a supported printer.
This version of the User Guide supports the ZebraNet Wireless Print Server, the ZebraNet
Wireless Plus Print Server, the ZebraNet Internal Wireless Plus Print Server, and the ZebraNet
b/g Print Server with printer firmware versions X.15.x or later. Some features or printers
require X.16.x, X.17.x, or later.
The following special versions of firmware or later also are supported. They are referred to in
this User Guide as ZSPx firmware.
• ZSP994P
• ZSP999F
• ZSP1027F
• ZSP1056E
• ZSP1082F
For older versions of firmware, refer to the Wireless Print Server User Guide, part number
13422L-XXX.
How This Document Is Organized
The User Guide is set up as follows:
Section Description
Introduction on page 11 This section provides an overview of the ZebraNet wireless print
servers.
Wireless Status and Settings
on page 29
This section presents several options for viewing or modifying the
wireless status and settings.
Troubleshooting on page 45 This section provides solutions to problems related specifically to
the wireless print servers.
WebView Web Pages on page 51 This section provides you with instructions for viewing the current
print server settings.