User guide

43
Wireless Status and Settings
Wireless Network Parameters on the LCD
2/16/11 Wireless User Guide 14143L-008 Rev. B
SUBNET MASK View the Subnet
Default Value: 255.255.255.0
Corresponding ZPL Command: ^ND
Corresponding SGD Command: ip.netmask
DEFAULT GATEWAY View the Gateway
Default Value: 0.0.0.0
Corresponding ZPL Command: ^WI
Corresponding SGD Command: ip.gateway
MAC ADDRESS
1
View the Wireless Radio Card’s MAC Address
Each wireless radio card has a permanent and unique Media Access Control
(MAC) address assigned to it. This parameter shows the MAC address for
the current wireless radio card.
Default Value: 000000000000
Corresponding ZPL Command: none
Corresponding SGD Command: card.mac_addr
ESSID
1
View the ESSID Value
The Extended Service Set Identification (ESSID) is an identifier for your
wireless network. This parameter shows the ESSID for the current wireless
configuration.
Default Value: 125
Corresponding ZPL Command: none
Corresponding SGD Command: wlan.essid
WLAN SECURITY
1
View the WLAN Security Type
This parameter displays the current security type.
Corresponding ZPL Command: ^WX
Corresponding SGD Command: wlan.security
RESET NETWORK
1
Reset the Wired or Wireless Network
Use this parameter to reinitialize the wireless radio card and the print server
(wired or wireless) when the wireless print server is running. This
parameter also causes any wireless radio card in the printer to reassociate to
the wireless network.
Corresponding ZPL Command: ~WR
Corresponding SGD Command: device.reset
Table 13 • Wireless Parameters for Other Printer Models (Continued)
Parameter
Function
1 If a wireless password is set, you must enter the wireless password (not the printer password) to access this parameter.