User guide

41
Wireless Status and Settings
Wireless Network Parameters on the LCD
2/16/11 Wireless User Guide 14143L-008 Rev. B
RESET NETWORK
1
Reset the Wired or Wireless Network
Use this parameter to reinitialize the wireless radio card and the print server
(wired or wireless) when the wireless print server is running. This
parameter also causes any wireless radio card in the printer to reassociate to
the wireless network.
Corresponding ZPL Command: ~WR
Corresponding SGD Command: device.reset
Table 12 • Wireless Parameters for S4M Printers (Continued)
Parameter Explanation
1 If a wireless password is set, you must enter the wireless password (not the printer password) to access this parameter.