User guide

Wireless Status and Settings
Wireless Network Parameters on the LCD
38
14143L-008 Rev. B Wireless User Guide 2/16/11
WLAN SECURITY View the WLAN Security Type
This parameter displays the current security type.
Corresponding ZPL Command: ^WX
Corresponding SGD Command: wlan.security
RESET NETWORK Reset the Wired or Wireless Network
Use this parameter to reinitialize the wireless radio card and the print server
(wired or wireless) when the wireless print server is running. This
parameter also causes any wireless radio card in the printer to reassociate to
the wireless network.
Corresponding ZPL Command: ~WR
Corresponding SGD Command: device.reset
Table 11 • Wireless Parameters for Xi4, R110Xi4,
ZM400, ZM600, RZ400, and RZ600 Printers (Continued)
Parameter
Function
1 If a wireless password is set, you must enter the wireless password (not the printer password) to access this parameter.